|Place of Origin:||China|
|Minimum Order Quantity:||1000PCS|
|Packaging Details:||Tube/Reel packaging|
|Delivery Time:||10 to 15 working days|
|Payment Terms:||T/T, Western Union|
|Rated Voltage:||100V AC(RMS) / DC||Insulation Resistance:||1000 MΩ Min|
|Voltage Resistance:||500V AC R.m.s||Operating Temperature Rang:||-20º C ~ +80º C|
|Rated Current:||0.5 A AC(RMS)||Durability:||5000 Cycles|
SIM FLASH Two-Card Seat With Metal Flip SM Card Seat, MS Card Seat
The main specifications of SD card seats are:
reset, pad type, three in one, four in one, long card, short card, etc.
SD card seats provided include: S card TF full plastic, according to the different packaging methods are divided into, patch SD card and plug-in SD card seat; in addition to self - bomb SD card, with a lock, SD card, micro SD card and so on.
What is the SD card connector?
It is a bouncing device. There is a reset device structure at the bottom of the card slot of the SD card holder. You can jump out the SD card.
Operation principle of SD card:
1. at the bottom of the SD card seat, there is a small diameter and small diameter spring or a cut cartridge, which is embedded in the card seat by the SD card, but can jump out on the contrary. Therefore, the clamp can not only temporarily lock the structure, but also temporarily pop-up, and so on, its main is to rely on this reset device to operate.
2. there is a corresponding convex opening in the slot, and its SD card is inserted into the card slot of the card seat, and then the read and write operation of the SD card is controlled by the command form transmission by the SD card seat, and the reading and writing operation of the multiple SD card or single SD card can also be carried out according to the command.
Product specifications and attributes:
|Rated voltage||100V AC(RMS) / DC|
|Pull out||1-10 Newtons|
|Contact resistance||100 mΩ Max|
|Insulation resistance||1000 MΩ Min|
|Voltage resistance||500V AC r.m.s|
|Operating temperature range||-20º C ~ +80º C|
Pay attention to details when using the SD card holder:
1. Do not be too large between the SD card holder and the SD card. If it is too large, it will have a wear effect on the chip of the SD card, which will cause some data errors when reading the data of the SD card in the SD card holder.
2. At present, the structure of SD card specifications is not the same, and it is not possible to use the SD card holder if it does not match the structure of the SD card. Therefore, the SD card holder must be selected according to the SD card structure.
3. For the interior of the SD card holder, it is also necessary to avoid the intrusion of water vapor. If you do not use the SD card holder, you will cause some errors in reading SD card data or abnormal data.
Purpose of service:
1. Lead customer choose a best connection sulotion way.
2. 20pcs free sample. Support more than 20pcs sample for old customer.
3. OEM/ODM service. We have a strong R&D team to support connector design.
4. Quickly response, email reply within 12hours,online inquiry is welcome.
5: Serivce attitude:our business is not just connector supply, it's about deliverying promises.
1.Quality policy: innovation, continuous improvement, quality first, customer satisfaction.
2.Environmental policy: comply with environmental regulations, strive to prevent and control pollution, rationally use resources, manufacture green products, raise environmental awareness, and continuously improve the environment.
3.Business philosophy: quality, loyalty, Co-Prosperity.
4.Service quality: technology-oriented, customer-oriented, and advanced high-precision manufacturing process, so that we are in the leading position in the industry. In the future, we will work with you to create a better tomorrow based on our high precision manufacturing technology and high quality service.
card seat specifications are mainly divided into: reset, pad height, three-in-one, four-in-one, long card, short card, etc..
The SD deck models provided include: S deck TF full plastic, divided into different packaging methods, patch SD mount and plug-in SD mount; There are also self-loading SD seats, lock SD seats, micro SD seats, and so on.
SD Card connector can be used in many places, etc.. You can also refer to the following picture combination.
Contact Person: Steven Luo