|Place of Origin:||CHINA|
|Minimum Order Quantity:||2K|
|Packaging Details:||Tube/Tray/Reel Packaging|
|Delivery Time:||7 to 10days|
|Payment Terms:||T/T, Western Union, MoneyGram|
|Current Rating:||1A||Withstand Voltage:||250V|
|Type:||PCB Board Connector|
1.0MM Pitch SMT Female Header,
PCB Build SMT Female Header,
1.0 AMP PCB Board Connector
SMT Female Header 1.0MM Pitch Customized Reel Packaing quality guarantee support PCB build
What is a PCB Connector?
Printed Circuit Board connectors are connecting systems, which are used to transfer signals or power from one PCB to another, or to or from the PCB from another source in the equipment build. As PCBs are not hard-wired to each other and can be assembled later in a production process, providing an easy method of Design for Manufacture.
PCB Connector orientations
The term PCB Connector refers to a basic multipin connection system, typically in a rectangular layout. A mating pair of PCB Connectors will either be for board-to-board or cable-to-board (wire-to-board). The board-to-board layouts can give a range of PCB connection orientations, all based on 90 degrees increments: Parallel or mezzanine – both connectors are vertical orientation;90 Degree, Right Angle, Motherboard to Daughterboard – one connector is vertical, one horizontal;180 Degree, Coplanar, Edge-to-Edge – both connectors are horizontal orientation.
Other names for PCB Connectors
PCB Connectors are known as PCB Interconnect product. Specific terms are also used for the two sides of the connection. There are also some other names for PCB connectors: Male PCB Connectors usually referred to Pin Headers, as they are simply rows of pins, while Female PCB Connectors named as Sockets, Receptacles, or even (somewhat confusingly) Header Receptacles.
|Current Rating||1.0 AMP|
|Contact Resistance||20 mΩ Max|
|Withstand Voltage||250 V AC/DC|
|Insulation Resistance||1000MΩ Min|
|Operation Temperature||-40℃ to 105℃|
|Contact Material||Coppy Alloy|
|Products Name||Female Header Connector|
|Mounting Type||Through Hole|
|Contact Plating||Au over Ni|
|insertion Force||2N Max|
|Withdrawal Force||0.3N Min|
|Durability||300 Mating Cycles|
|Solder Temperature||260℃ for 10 seconds|
Contact Person: Steven Luo