|Place of Origin:||China|
|Minimum Order Quantity:||2Kpcs|
|Packaging Details:||PE/Tray/Tube/Tape/Reel Packaging|
|Delivery Time:||7 to 15 working days|
|Payment Terms:||T/T & Western Union|
|Supply Ability:||100000pcs per day|
|Housing:||High Temperature Thermoplastic UL94V-0||Color:||Black|
|Contact Area:||Gold Over Nickel||Solder Area:||Tin Over Nickel|
|Multimedia Card Compatible:||Sandisk/Kingston/SONY/Transcend/etc||WP:||Write Protect|
|CD:||Card Detect Indication||Solder Notification:||Tail Burr Must Be Within 0.1max|
|Application:||Car Industry/Display/Computer/Sport Camera|
network cable connector,
micro usb male connector
TF Kingston Micro SD Card Connector Gold Over Nickel For Ctor Car Multimedia
The SD holder is a bouncing device. There is generally a reset device structure at the bottom of the card slot of the SD holder. The SD card can be ejected. The principle of operation is that there is a small diameter and small diameter spring or an incision shrapnel at the bottom of the slot in the SD card seat. Press the SD card to insert the card inside the card seat. On the contrary, you can bounce out with a click. Therefore, the holder can not only temporarily lock the dead structure, but also temporarily eject, etc..
The main thing is to rely on this reset device to operate.
The main specifications of SD card seats are:
reset, pad type, three in one, four in one, long card, short card, etc.
SD card seats provided include: S card TF full plastic, according to the different packaging methods are divided into, patch SD card and plug-in SD card seat; in addition to self - bomb SD card, with a lock, SD card, micro SD card and so on.
What is the SD card connector?
It is a bouncing device. There is a reset device structure at the bottom of the card slot of the SD card holder. You can jump out the SD card.
Operation principle of SD card:
1. at the bottom of the SD card seat, there is a small diameter and small diameter spring or a cut cartridge, which is embedded in the card seat by the SD card, but can jump out on the contrary. Therefore, the clamp can not only temporarily lock the structure, but also temporarily pop-up, and so on, its main is to rely on this reset device to operate.
2. there is a corresponding convex opening in the slot, and its SD card is inserted into the card slot of the card seat, and then the read and write operation of the SD card is controlled by the command form transmission by the SD card seat, and the reading and writing operation of the multiple SD card or single SD card can also be carried out according to the command.
Product specifications and attributes:
|Rated voltage||100V AC(RMS) / DC|
|Pull out||1-10 Newtons|
|Contact resistance||100 mΩ Max|
|Insulation resistance||1000 MΩ Min|
|Voltage resistance||500V AC r.m.s|
|Operating temperature range||-20º C ~ +80º C
Contact Person: Steven Luo
Dual Row 10 Pin Header Connector , Male Pin Pcb Wire To Board Connectors
DIP10 Pin Box Header Connector Contact Resistance 20 MΩ Max Current Rating 1.0AMP
2.54mm Pitch Board To Cable Connectors , Male Pin Board To Wire Connector
Straight Board To Wire Box Header Connector 1.27mm Pitch 34 Pin Gold Flash
2.54mm 10 Ways DIP PCB Wire To Board Connectors Straight Through Hole
2 * 20 Pin PCB Wire To Board Connectors With Latch 1.27 Mm Ejector Header
Black PCB Wire To Board Connectors Gold Flash 1000MΩ Min Insulation Resistance:
Right Angle 26 Pin PCB Wire To Board Connectors Ejector Header Black Color