Payment & Shipping Terms:
|Rated Voltage:||100V AC(RMS) / DC||Insulation Resistance:||1000 MΩ Min|
|Voltage Resistance:||500V AC R.m.s||Operating Temperature Rang:||-20º C ~ +80º C|
|Rated Current:||0.5 A AC(RMS)||Specification:||SD Card Connector Three In One|
network cable connector,
usb circuit board connector
TD Three In One 3IN1 Card Holder Terminal Version SD Card Holder Three In One
|Specification||SD card Connector three in one|
|Rated current||0.5 A AC(RMS)|
|Rated voltage||100V AC(RMS) / DC|
|Contact resistance||100 mΩ Max|
|Insulation resistance||1000 MΩ Min|
|Voltage resistance||500V AC r.m.s|
|Operating temperature range||-20º C ~ +80º C|
Three and one seat introduction:
Taiwan version of the three-in-one card seat, good temperature resistance, reliable service life and card stability, worthy of customer trust! Contact terminal gold-plated specifications have 3 to 15 'to meet the needs of the high-end market. The good soldering of tin feet and the level control required for SMT are also extremely guaranteed. This product is widely used in notebook computers, tablets, netbooks, and other digital electrical devices that need to support the reading of MS/SD/MMC.
Notes for use of SD deck:
1. When the SD holder is used in a dusty environment, dust will enter the interior from the interface of the SD holder. If there is too much accumulation, the use of the SD holder will cause contact failure and poor action. Therefore, dust or debris inside the SD holder should be removed regularly.
2. When the SD card holder is running, do not unplug the SD card at will, otherwise it will cause the SD card data to be lost on the one hand, and it may also cause the SD card holder to be damaged at the same time.
3. In the use of the SD card holder, be careful not to insert the SD card backwards, otherwise it can not be read on the reading data of the SD card holder.
Purpose of service:
1. the series of product specifications are complete, but also tailor-made.
2. import equipment and high degree of automation timely delivery. Usually 7-10 days.
3. strict implementation of the ISO 9000 and ERP system, the supply of materials strictly in accordance with the quality and standard production control. Product quality assurance through UL-certified.
4. Free sample 15-20 sets, cost-effective, the same quality unit price is very competitive
5. the quality is safe and reliable, the price is competitive.
SD mount models include:
S mount TF full plastic, divided into different packaging methods, patch SD mount and plug-in SD mount; There are also self-loading SD seats, lock SD seats, micro SD seats, and so on.
Scope of use:
The SD holder is a bouncing device. There is generally a reset device structure at the bottom of the card slot of the SD holder. The SD card can be ejected. The principle of operation is that there is a small diameter and small diameter spring or an incision shrapnel at the bottom of the slot in the SD card seat. Press the SD card to insert the card inside the card seat. On the contrary, you can bounce out with a click. Therefore, the holder can not only temporarily lock the dead structure, but also temporarily eject, etc.. The main thing is to rely on this reset device to operate.
Dual Row 10 Pin Header Connector , Male Pin Pcb Wire To Board Connectors
DIP10 Pin Box Header Connector Contact Resistance 20 MΩ Max Current Rating 1.0AMP
2.54mm Pitch Board To Cable Connectors , Male Pin Board To Wire Connector
Straight Board To Wire Box Header Connector 1.27mm Pitch 34 Pin Gold Flash
2.54mm 10 Ways DIP PCB Wire To Board Connectors Straight Through Hole
2 * 20 Pin PCB Wire To Board Connectors With Latch 1.27 Mm Ejector Header
Black PCB Wire To Board Connectors Gold Flash 1000MΩ Min Insulation Resistance:
Right Angle 26 Pin PCB Wire To Board Connectors Ejector Header Black Color