Payment & Shipping Terms:
|Rated Voltage:||100V AC(RMS) / DC||Insulation Resistance:||1000 MΩ Min|
|Voltage Resistance:||500V AC R.m.s||Operating Temperature Rang:||-25º C ~ +80º C|
|Rated Current:||0.5 A AC(RMS)||Contact Material:||Copper|
network cable connector,
usb circuit board connector
Tai Ho Version Three In One Card Connector Large Material Contact Copper
|Product Model||Tai Shi version three in one card|
|Rated current||0.5A AC (RMS)|
|Rated voltage||100V AC(RMS) / DC|
|Contact resistance||100 mΩ Max|
|Insulation resistance||1000 MΩ Min|
|Voltage resistance||500V AC r.m.s|
|Operating temperature range||-25º C ~ +80º C|
The main specifications of SD card seats are:
reset, pad type, three in one, four in one, long card, short card, etc.
SD card seats provided include: S card TF full plastic, according to the different packaging methods are divided into, patch SD card and plug-in SD card seat; in addition to self - bomb SD card, with a lock, SD card, micro SD card and so on.
What is the SD card connector?
It is a bouncing device. There is a reset device structure at the bottom of the card slot of the SD card holder. You can jump out the SD card.
Operation principle of SD card:
1. at the bottom of the SD card seat, there is a small diameter and small diameter spring or a cut cartridge, which is embedded in the card seat by the SD card, but can jump out on the contrary. Therefore, the clamp can not only temporarily lock the structure, but also temporarily pop-up, and so on, its main is to rely on this reset device to operate.
2. there is a corresponding convex opening in the slot, and its SD card is inserted into the card slot of the card seat, and then the read and write operation of the SD card is controlled by the command form transmission by the SD card seat, and the reading and writing operation of the multiple SD card or single SD card can also be carried out according to the command.
1. Are you a Facotry?
Yes, We are the one of largest connector manufacturer local in Shenzhen,China.We warmly welcome you visit our facotry.
2. How to get a free sample to check the quality?
We ususlly offer within 20pcs samples, but freight should be coolected
3. When can I get a quotation assembly?
There are two differents way to get a quote, one is online inquiry, one is email us.We'll detail with your inquirys within 12hours.
4. What about the lead time for mass production?
It depend on order quantity. Generally speaking, We'll finish your order within 2weeks. Urgent part will delivery in one week.
Why Choose CNJWY:
Research and Development Capability:
Strong research and development capability on product designing and mould developing makes CNJWY able to evaluate the new product,which could help clients save the time cost.
CNJWY has our own assembly lines from electroplating,stamping,moulding,injection and packaging.
Strictly following the demands of ISO9001-2015,CNJWY is able to produce products of highest quality.
More than 10 years of producing experience,CNJWY is always specializing in improving the production capacity.Competitiveness provides competitive price for the valued customers.
Where it needs to be used:
The SD card holder is a bouncing device. There is a reset device structure at the bottom of the card slot of the SD card holder. The SD card can be springing out and.SD card can be applied to the following fields.
Dual Row 10 Pin Header Connector , Male Pin Pcb Wire To Board Connectors
DIP10 Pin Box Header Connector Contact Resistance 20 MΩ Max Current Rating 1.0AMP
2.54mm Pitch Board To Cable Connectors , Male Pin Board To Wire Connector
Straight Board To Wire Box Header Connector 1.27mm Pitch 34 Pin Gold Flash
2.54mm 10 Ways DIP PCB Wire To Board Connectors Straight Through Hole
2 * 20 Pin PCB Wire To Board Connectors With Latch 1.27 Mm Ejector Header
Black PCB Wire To Board Connectors Gold Flash 1000MΩ Min Insulation Resistance:
Right Angle 26 Pin PCB Wire To Board Connectors Ejector Header Black Color